How To Improve Incident Response Strategy Using Threat Modeling?

Threat modeling is becoming more popular as a technique to plan security ahead of time. An organization can detect and analyze its overall security, potential threats, and defense loopholes that may enable cyberattacks to succeed rather than simply reacting to threats and occurrences

Threat modeling and incident response are linked in two ways

  1. Whenever an attack occurs, incident responders can greatly benefit from a threat model that illustrates which active attacks are most likely to harm a system, what safeguards are in effect, and what procedures are required to neutralize the attack.
  2. Insights gained by incident responders ought to be used to improve the threat model after an attack.

What Is Incident Response?


A way to deal with security vulnerabilities is basically known as incident response. The goal of incident response is to locate an attack, minimize the harm, and eliminate the incident’s underlying source. An unlawful act, policy, or inappropriate act involving information assets like networks, computers, or cell phones is referred to as an incident.

Why Is It Important?


Your organization may be able to minimize losses, reestablish systems and procedures, and reduce exploited vulnerabilities if it responds fast to an incident. A data breach with disastrous implications can result from an incident that is not adequately contained. Incident Response Serves as the first line of defense against security occurrences, and it also aids in the development of a set of best practices for preventing intrusions before they occur in the long run.

Also Read | MongoDB Vs MySQL: Which One Is A Better Database?

What Is Thread Modeling?


Threat modeling is a technique for detecting vulnerabilities, estimating the most likely forms of attacks, and putting in place the security protocols needed to secure your company from those threats. While there are numerous Threat Modeling Frameworks to choose from, these are some general guidelines to make sure your system is always secure.

Why Is It Important?


Threat modeling can assist security teams in prioritizing risks and properly distributing focus and efforts. This prioritizing can be used to make sure that security mechanisms are as effective as feasible during the planning, design, and implementation stages.

When done on a regular basis, threat modeling can also assist security teams in keeping their defences up to date with changing threats. If not, new attacks may go unnoticed, putting systems and data at risk.

When it comes to implementing new software or developing a new program, threat modeling is crucial. It assists teams in determining how susceptible tools and applications are in relation to the safeguards available.

Threat modeling aids teams in determining where security is inadequate while using new tools. This enables you to make an educated judgment over whether an element is worthwhile to use.

Threat modeling can also assist software developers in prioritizing software repairs depending on the seriousness and impact of potential attacks.

Implementation Of Threat Modeling

Step 1: Identifying Assets

In case of an attack on the network, the most precious assets of the business would be the first targets and therefore at the highest risk. Therefore, it becomes imperative to recognize your asset and identify those that require protection. Anything critical to the business should be prioritized.

Some common examples of such assets include customer and payment information, corporate financial data, proprietary software code, HR information, patents and copyrights, client or vendor contracts, and manufacturing processes.

Also Read | Ruby Vs Python-Which Is Better For Web Development?

After identification is complete, ascertaining the location, as well as the ways to access the assets, is important.

Step 2: Identify who has access

The next step is to have knowledge of who has access to the critical assets identified in step 1 and determine if their roles are controlled. These may include employees, contractors, and business partners. Now confirming that those accessing the assets have required access authority becomes imperative

Appropriate measures must be put in place so as to promptly alert the security personnel of any unauthorized access. If any such cases are found, the security team must quickly restrict or deactivate the user’s access.

Step 3: Identify vulnerabilities and threat

Now, Think about the threats that each environment faces. To identify possible attackers who may try to infiltrate the network, using an adversary-based threat model can prove to be of value. Typically, this model identifies four sorts of attackers:

  • Network – Generally conducts man-in-the-middle attacks, intercepting communication between two parties.
  • Malicious insider –  Any authorized user like employees, vendors, or anyone who has access to the network.
  • Remote software – Attempts to breach security software by introducing malicious scripts/code or a virus to steal data or take control of the device or network.
  • Advanced hardware – Sophisticated attacks using specialized equipment will be launched by the attacker through physical access to the device.

After determining possible threats, look for potential flaws. Take into account any hardware, programs, connected devices, or communication channels that could allow attackers to gain access to the network. Overprivileged accounts, inadequate password policies, security misconfigurations, and unpatched software are all examples of vulnerabilities. To determine potential security concerns, use a threat model approach for each access point for each probable vulnerability.

Step 4: Determine mitigations for each threat

After detecting potential risks, implement a suitable level of security to protect each environment. This can be accomplished by defining response classes based on the severity of the incident and the surrounding circumstances. For example, Unauthorised user access could be responded to by applying a watch-and-wait method, in which the user’s privileges are reduced and suspicious activity is tracked. If a user’s password has been compromised, access should be disabled immediately.

ALso Read | What Makes Flutter A Better Choice For Developing A Startup App In 2021

To assess the effect of threats, the Common Vulnerability Scoring System can be useful. It assigns a number from 0 to 10 to represent the severity of an attack on a device or network. Devote more emphasis and resources to a threat with a higher ranking.

Step 5: Repeat the cycle

The process of threat modeling for incident response is a continuous and perpetual process. You must regularly review the efficiency of an incident response plan based on threat modeling by tracking the rates of critical occurrences over time. If the number of incidents decreases as a result of policy modifications or other mitigations, your incident response plan is performing well.

Also Read | ReactJS Projects For Beginners

This threat modeling process should be continuously conducted as and when new elements are added to the system, such as program upgrades, new devices, and additional users, to guarantee that the system is always secure. Planning and a well-defined procedure are the keys to the most efficient and effective incident response.

Need For Threat Models For Incident Response


All organizations are affected by security issues, which range from compromised hosts to social engineering and malevolent insiders. Threat modelling aids incident response by offering a better understanding of threat paths to security professionals.

The process outlined below assists application security teams in identifying risks and responding effectively and quickly

1. Incident Response Plan


The incident response planning phase usually gives the incident responder a framework based on the following: NIST or SANS Incident Response Process. Threat modeling should ideally be incorporated into incident response during the planning stage. For instance, if your incident response plan comprises particular components for dealing with specific kinds of threats, your organization’s threat model must explain those parts.

Also Read | Software Development Tools To Use

2. Identification of the Incident


Assess the very first issue and the attack’s reach. This is meant to be a rapid and rough comprehension, not a comprehensive analysis with detailed documentation. You can show a graphic to your staff to assist them to visualise the breach.

3. Identification of Threats


In the threat model, map incidents to possible harm, use threat scenarios to determine how to behave, and look for further similar incidents.

Use the attack tree to represent the risk, prioritize or exclude alternative possibilities, and analyze to check the threat if you’re not sure what’s happening. Do not dismiss possibilities that appear improbable. Test them to discover if modifications in software or the ecosystem, new bugs, and other precautions make it conceivable.

4. Threat Model Update


You can refresh the plan to preserve the threat model once the attack is over and the attack vector is identified. In wake of recent events, update the threat classification. You can also write automated tests and execute them on a continual basis to see if current threats can be addressed.

Also Read | What Is Software Reporter Tool And Why Is It There In Chrome Folder?

Collaborate with your security and IT teams to resolve the underlying cause if it persists after the attack has been neutralized. Other pertinent incidents should be identified and compared to threat data to evaluate if they’ve been effectively managed. This is a crucial component of threat modeling. Understand the bigger picture when it comes to threats and makes sure they’re removed beyond specific events.

In A Nutshell…


In the following important ways, threat modeling approaches can affect and improve incident response:

  • It aids in the faster detection of problems and the assessment of their seriousness.
  • Assists incident responders in acting more efficiently and decisively.
  • When connected with the incident response process, incident responders create a feedback loop that allows the threat model to be updated on a regular basis.

Threat modeling promotes speed and performance, allowing you to make the work worth your time and money as your organization’s incident response and security investigation process mature and improve. Like this article? Give more articles a try on Codersera and up your learning!